Assembling MevaDec slab formwork panels from above requires adequate safety measures and reliable fall protection. This safety harness is attached to two concrete blocks that a securely fixed to the slab formwork panels. This works safely only with MevaDec slab panels and their all-plastic facing panel, as certified by the European certification authority DEKRA. Time and effort amounts to 20 % using this method.
1: Attachment point including ring bolt
2: Ring bolt 4.0 t, M16, Grade 100
3: Horizontal safety belt 16 m
4: Height protection device
5: Fall dampener
6: Screw carabiner, galvanized steel
7: Lockable carabiner, galvanized steel
8: Protective sheath
The worker secures himself personally via the fall protection harness (4) plus height protection device to the horizontal protection belt (3) between the concrete blocks (1).
Better Ergonomics
Using the fall protection system SpanSet, you can assemble MevaDec slab formwork from above safely and quickly.
3 methods in one Slab formwork system: 1) drop-head beam panel method with early stripping. 2) Panel method with panels only. 3) Primary and secondary beam method for separate facing for compensation areas.